
Products
Types of spec
Types of Products
Blanking and piercing are shearing processes in which a punch and die are used to produce parts from coil or sheet stock. Blanking produces the outside features of the component, while piercing produces internal holes or shapes. The "slugs" produced by piercing internal features are also considered scrap. The terms "piercing" and "punching" can be used interchangeably.
Thinkness | 0.4mm ~ 3.2mm |
---|---|
Width | 350mm ~ 1,850mm |
Length | 300mm ~ 4,000mm |
Aplicado en | CR, GI, GA, HR, PO |
Cross-cutting process of steel sheet, obtaining trapezoidal, rectangular or silhouette-type plates through die-cutting tools.
Production line for longitudinal cutting of raw materials to the required width according to the client's request
Thinkness | 0.3mm ~ 2.3mm (Light) |
---|---|
Width | 100mm ~ 1,680mm |
Aplicado en | CR, GI, GA, EG, STS, NO, PO |
Cross-cutting process of steel sheet, obtaining trapezoidal, rectangular or silhouette-type plates through die-cutting tools.
Production line for longitudinal cutting of raw materials to the required width according to the client's request
Thinkness | 1.6mm ~ 6.0mm (Heavy) |
---|---|
Width | 100mm ~ 1,680mm |
Aplicado en | CR, GI, GA, HR, NO, PO |
Blanking and piercing are shearing processes in which a punch and die are used to produce parts from coil or sheet stock. Blanking produces the outside features of the component, while piercing produces internal holes or shapes. The "slugs" produced by piercing internal features are also considered scrap. The terms "piercing" and "punching" can be used interchangeably.
Thinkness | 0.4mm ~ 3.2mm |
---|---|
Width | 100mm ~ 1,850mm |
Length | 300mm ~ 4,000mm |
Aplicado en | CR, GI, GA, EG |
Cross-cutting process of steel sheet, obtaining trapezoidal, rectangular or silhouette-type plates through die-cutting tools.
Production line for longitudinal cutting of raw materials to the required width according to the client's request
Thinkness | 0.3mm ~ 3.2mm (Heavy Gauge) |
---|---|
Width | 100mm ~ 1,680mm (Heavy Gauge) |
Aplicado en | CR, GI, GA, EG, STS, Alcost, PO |
Cross-cutting process of steel sheet, obtaining trapezoidal, rectangular or silhouette-type plates through die-cutting tools.
Production line for longitudinal cutting of raw materials to the required width according to the client's request
Thinkness | 1.6mm ~ 6.5mm (Heavy Gauge) |
---|---|
Width | 100mm ~ 1,680mm (Heavy Gauge) |
Aplicado en | CR, PO, HR |
Blanking and piercing are shearing processes in which a punch and die are used to produce parts from coil or sheet stock. Blanking produces the outside features of the component, while piercing produces internal holes or shapes. The "slugs" produced by piercing internal features are also considered scrap. The terms "piercing" and "punching" can be used interchangeably.
Thinkness | 0.4mm ~ 3.2mm |
---|---|
Width | 400mm ~ 2,000mm |
Length | 300mm ~ 5,000mm |
Aplicado en | CR, GI, GA, EG |
Cross-cutting process of steel sheet, obtaining trapezoidal, rectangular or silhouette-type plates through die-cutting tools.
Production line for longitudinal cutting of raw materials to the required width according to the client's request
Thinkness | 0.3mm ~ 4.5mm (Light) |
---|---|
Width | 300mm ~ 1,680mm |
Aplicado en | CR, GI, GA, EG, STS, PO |
A high-speed square material processing and production line that uses a cutting blade to make raw materials into the inner/outer plate of household appliances
Thinkness | 0.3mm ~ 2.3mm |
---|---|
Width | 200mm ~ 900mm |
Length | 200mm ~ 3,600mm |
Aplicado en | CR, GI, GA, EG |
Blanking and piercing are shearing processes in which a punch and die are used to produce parts from coil or sheet stock. Blanking produces the outside features of the component, while piercing produces internal holes or shapes. The "slugs" produced by piercing internal features are also considered scrap. The terms "piercing" and "punching" can be used interchangeably.
Thinkness | 0.4mm ~ 3.2mm |
---|---|
Width | 400mm ~ 2,000mm |
Length | 300mm ~ 4,750mm |
Aplicado en | CR, GI, GA, EG |
Cross-cutting process of steel sheet, obtaining trapezoidal, rectangular or silhouette-type plates through die-cutting tools.
Production line for longitudinal cutting of raw materials to the required width according to the client's request
Thinkness | 0.4mm ~ 3.2mm |
---|---|
Width | 300mm ~ 1,720mm |
Aplicado en | CR, GI, GA, EG, STS, NO |
Do you have any questions? comments or are you interested in any of our products? Don't hesitate to send us a message!